KBZE4501 Air Preparation Unit¹ AIR PROCESSING UNIT = EL9002 + AE4560

Technical Information:
Air Inlet port(s) size: LA: M22x1,5
Air Delivery port(s) size:
LA: 23: M12x1.5, 24: M22x1.5, 25: M16x1.5, 4/23: M12x1.5;
MCPV: 21,22,23,24: M16x1,5; 26: M22x1,5
Purge control: Electrical
Tyre Inflator port size: M22x1,5
Unloader cut-out pressure [bar]: from 9.4 to 11,2
Unloader pressure control range [bar]:
programmable
Circuit 1: Feedback with Bypass
Circuit 1 - Open/close pressure [bar]:
7.5 + 0.3 / 6.5 ± 0.25
Circuit 1 - Pressure Limiting [bar]: Not included
Circuit 2: Feedback with Bypass
Circuit 2 - Open/close pressure [bar]:
7.5 + 0.3 / 6.5 ± 0.25
Circuit 2 - Pressure Limiting [bar]: Not included
Circuit 3: Feedback with no Bypass
Circuit 3 - Open/close pressure [bar]:
7.5 +0.1 -0.2 / 5.9 ± 0.2
Circuit 3 - Pressure Limiting [bar]: 8,5 +0,0/-0,3
Circuit 4: Feedback with no Bypass
Circuit 4 - Open/close pressure [bar]:
7.5 +0.1 -0.2 / 5.9 ± 0.2
Circuit 4 - Pressure Limiting [bar]: 8,5 +0,0/-0,3
Bleed-back safety feature:
Controlled by Circuit 1
Circuits' supply: Internal series supply from 1
With Electrical pressure sensing: Yes
Exhaust Connector: Ø 16,0 mm Push Connector
Heater Connector Type: Bayonet ISO 15170 A1 - 2.1.14
Heater Voltage [volts]: 24
Air dryer part number: K011867N00
Four circuit protection valve part number: K048307N00
Cartridge type: Conventional
Semi Electonic Control: Yes