CD065225 Air Dryer, compressed-air system1 AD-9 AIRDRYER 12 VOLT 75W 1/2"npt NEW
Technical Information:
Air Dryer Type: Stand-Alone
Body Mounting:
Ø .425 Hole with 3/8-24 UNF-2A Bolted Joint (8x)
Lower Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Lower Mounting Bracket Angle (CCW from SUP): Loose in Box
Upper Mounting Type: Strap (Carbon Steel)
Upper Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Upper Mounting Bracket Angle (CCW from SUP): Loose in Box
Upper Mounting Bracket Height (from Lower Mounting Bracket):
Loose in Box
Supply Port: 1/2-14 NPT
Control Port: 1/4-18 NPT
Delivery Port 1: 1/2-14 NPT
Purge Exhaust Port: Open
Purge Valve Type: Hard Seat
Purge Volume: Standard
Safety Valve Opening Pressure: 200 PSI
Heater / Thermostat Rating: 12V / 75W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: White
Cartridge Type: Standard
Cartridge Thread: 5/8-11 UNC-2A
Cartridge Stabilizer Ring Included: No
Clearance to Remove Cartridge: 11.00 IN
Governor Included: No
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Weight [kg]: 12.59
Viewed
1) Installation instructions are not included in all instances. If you or your customers require installation instructions, please ask before ordering. All products should be installed only according to the intended purpose and only by specialist trained personnel. 2) The parts offered are reproductions. The specified original replacement parts numbers are for the purpose of comparison. This information has been complied to the best of our abilities, but errors cannot be excluded. We are unable to accept liability for the accuracy of the specifications. The capability for use must be checked before each installation.