09.801.08.69.0 Repair Kit1 Guide Pin Kit - TS2 Per Axle Side
Technical Information:
Use: TS2
Additional extended text: Important installation instruction
: First fit cylinder head screw 325 in the long fixed bearin
g (mark 1 on the brake caliper) and then cylinder head screw
345 in the short floating bearing (mark 2 on the brake cali
per) and tighten at the tightening torque of 260 Nm (250 - 2
70 Nm).
Dimension: for one axle side
Additional text: item 325 - 328, 335, 336, 345 - 348, 354, 3
56, 369, 373
Name: Repair kit guide pins TS2
Use: TS2
Additional extended text: Important installation instruction
: First fit cylinder head screw 325 in the long fixed bearin
g (mark 1 on the brake caliper) and then cylinder head screw
345 in the short floating bearing (mark 2 on the brake cali
per) and tighten at the tightening torque of 260 Nm (250 - 2
70 Nm).
Dimension: for one axle side
Additional text: item 325 - 328, 335, 336, 345 - 348, 354, 3
56, 369, 373
Name: Repair kit guide pins TS2
Viewed
1) Installation instructions are not included in all instances. If you or your customers require installation instructions, please ask before ordering. All products should be installed only according to the intended purpose and only by specialist trained personnel. 2) The parts offered are reproductions. The specified original replacement parts numbers are for the purpose of comparison. This information has been complied to the best of our abilities, but errors cannot be excluded. We are unable to accept liability for the accuracy of the specifications. The capability for use must be checked before each installation.